MYLER 5″ DEE RING CORRECTIONAL LOW PORTED 27PB CI WITH HOOKS BIT

MYLER 5″ DEE RING CORRECTIONAL LOW PORTED 27PB CI WITH HOOKS BIT

MYLER 5″ DEE RING CORRECTIONAL LOW PORTED 27PB CI WITH HOOKS BIT

Myler Stainless Steel 3 3/4″ Dee with Hooks, MB 27PB Correctional Low Ported Barrel, Level 2-3

The MB 27PB is a Myler correctional mouthpiece, which is a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. The port, although narrow and somewhat low, allows room for the horse’s tongue to pass under the bit. When the reins are engaged and the mouthpiece rotates on to the tongue, it applies two concentrated points of pressure on the tongue for quick control. Because this port is only 1 ¼” high, it will apply little to no palate pressure.

  • Independent Side Movement
  • Stainless Steel Mouthpiece
  • Curved Mouthpiece
  • Copper Inlay

Notes: For more tongue relief, see the MB 41PB. For the same mouthpiece without Independent Side Movement, see the MB 27LP. For a non-correctional version offering more tongue relief, see the MB 43LP.

The dee with hooks is a stainless steel “D” shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝” bridle leather. The slots on the pony dee will fit ¾” bridle leather.

The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.

Size: 3 3/4″ standard dee

Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.

Discipline: Primarily English

Degree of Leverage: Little to no leverage when the hooks are used

Style # 89-22255

Price:

$179.95

Step 1 Make a Selection

1 in stock

SKU 89-22255 Categories ,

You can shop at The Bony Pony with confidence. We have partnered with Authorize.net, a leading payment gateway, to accept credit card payments safely and securely for our customers. The Bony Pony is registered with the Authorize.net Verified Merchant Seal program.

Description

Myler Stainless Steel 3 3/4″ Dee with Hooks, MB 27PB Correctional Low Ported Barrel, Level 2-3

The MB 27PB is a Myler correctional mouthpiece, which is a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. The port, although narrow and somewhat low, allows room for the horse’s tongue to pass under the bit. When the reins are engaged and the mouthpiece rotates on to the tongue, it applies two concentrated points of pressure on the tongue for quick control. Because this port is only 1 ¼” high, it will apply little to no palate pressure.

  • Independent Side Movement
  • Stainless Steel Mouthpiece
  • Curved Mouthpiece
  • Copper Inlay

Notes: For more tongue relief, see the MB 41PB. For the same mouthpiece without Independent Side Movement, see the MB 27LP. For a non-correctional version offering more tongue relief, see the MB 43LP.

The dee with hooks is a stainless steel “D” shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝” bridle leather. The slots on the pony dee will fit ¾” bridle leather.

The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.

Size: 3 3/4″ standard dee

Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.

Discipline: Primarily English

Degree of Leverage: Little to no leverage when the hooks are used

Style # 89-22255

Additional information

Weight1 lbs
Dimensions1 × 9 × 4 in

Reviews

There are no reviews yet.

Be the first to review “MYLER 5″ DEE RING CORRECTIONAL LOW PORTED 27PB CI WITH HOOKS BIT”

Your email address will not be published. Required fields are marked *

Login

20% off
store wide*

November 29 thru December 2

*Excludes gift cards, Kimes Ranch Jeans, heated jackets, vests and socks, English Saddles, Western Saddles, 13MWZ Wrangler Jeans, 936DEN Wrangler Jeans, roping dummies, services, clearance, layaways, and special orders.

20% Off Winter Apparel & Winter Horse Blankets

Offer valid until February 29, 2024

Winter apparel includes winter footwear, heated and non-heated jackets, heated and winter breeches, coats, sweatshirts, winter gloves and vests. Winter horse blankets includes any blanket with 100G fill or more.